Getting a BMW Replacement Key Fob
Today’s BMW key fob has an ever-growing array of functions. If you’ve just switched from an older model, or are getting a replacement fob there’s a lot to learn about this little remote.
If your BMW’s key fob battery is dying there’s a simple solution. The procedure varies a bit based on what type of key you own.
Battery
BMW key fobs today have more features than they ever have before. They can unlock your car and start it. They are more sophisticated, whether you have the Display Key or Comfort Access. They require different programming, and they have unique issues with the added features. They also have batteries that needs to be replaced periodically, which is why it’s important to keep spare batteries on hand.
The replacement of the battery inside your BMW fob should only take a few moments. The first step is to remove the fob’s backing plate. This can be done using the valet key or using a small screwdriver. (We recommend covering the screwdriver’s head with tape to prevent scratching). The battery can then be removed by taking out the gap. The battery can be replaced by a new one, and the fob backplate must be sealed.
The standard coin-cell battery CR2032 is used in most BMW keyfobs. This can be found in most drugstores and grocery stores. If your fob can be recharged you’ll need to call the dealer closest to you to get a replacement. The battery is not meant to be opened, therefore it does not come with an opening blade, like older diamond shaped fobs.
A damaged or dead battery can be a major inconvenience, especially for areas like Long Island and the surrounding NYC area. It could take up to two weeks for the dealer to receive and program the replacement key fob. You won’t be able to use your vehicle during that time.
It is possible to replace your BMW key fob, however it’s expensive. It will also require an extra service to get it deactivated in your car’s system to prevent it from being able to lock and start the engine. Using this service will also remove any other devices that use the same signal, like your smartwatch.
Programming
BMW key fobs are equipped with various features to help you on the road. It can be used to lock and unlock your vehicle as well as open the trunk and start the engine. If you’re looking to take things up a notch you can also pair your key fob to an electronic display key that allows you to control your vehicle from a distance. All of this is possible due to the most up-to-date BMW technology. What happens if the key fob gets lost or damaged? The good news is that the team here at BMW of Tenafly has a solution.
The process of replacing a BMW key fob isn’t nearly as costly as you think. In fact, you can get one from a variety of online retailers that specialize in car keys. Choose a reputable seller to avoid an item that is stolen or counterfeit.
You will need to program your new BMW key fob after you get it. It’s an easy process that you can do at home with just a few items.
Begin by closing all windows and doors in your BMW. Do not start the engine. Insert the working key into the ignition, and turn the position to 1. Press and hold the unlock key on the new keyfob while pressing three times the BMW logo. Release the unlock button. Within 30 seconds, the doors should be locked and unlock automatically. If this isn’t the case, you’ll have to start the process from the beginning.
Repeat this process for any other BMW key fobs you want to program at the time. You must do this within 30 seconds or you will be required to restart the process. Then, you’re free to enjoy your BMW around Williamstown with the key fob functionality that you require. Contact Patrick BMW if you have any questions or concerns about programming a BMW key fob replacement.
Keyless Entry System
The new bmw key replacement cost keyfob can be more than just a device to unlock doors. It can also be used to start the car, close the sunroof, and operate the windows. Some of them activate by pressing the fob of your key, while others are activated with pressing the BMW key symbol on the steering wheel.
These newer BMW keyfobs have the ability to store customized settings, such as steering wheel, seat, and mirror adjustments. This is called Comfort Access, and it is a great convenience to drivers. If you’re using Comfort Access, you are able to unlock your BMW by simply pressing the handle of the door without pressing the button on your key fob.
You can check whether a used BMW has Comfort Access using an online VIN decoder. You can ask the previous owner of the vehicle whether it was installed. If you decide to buy an used BMW that doesn’t come with Comfort Access it is possible to have it retrofitted by an expert at the dealership.
The procedure to purchase and activate an additional BMW key fob is the same as it is for any other model. When you have placed your order, the new key fob could take up two weeks to be produced. Then it must be paired with your BMW that will have to be programmed to recognize the new key fob.
A replacement BMW key fob is accompanied by additional costs. If your car is insured by Patrick BMW, the cost of a new key as well as programming can be covered. You can also safeguard the value of your new BMW by purchasing a key protection. This will cover the cost of replacement should you lose your key. The insurance is valid for the first three years, and you can then renew at a discounted price. This is a great choice for those who want peace of mind, and avoid the high cost of replacing the key fob that has not been protected.
Remote Start
BMW key fobs are packed with a plethora of variety of functions. They can unlock doors as well as open the windows, operate the boot, and even start your engine. If you are looking to purchase a new BMW you will want to work with someone who is well-versed in all the features and can help you make the most of these features.
The most recent BMWs include, for instance, have the ability to automatically fold in your vehicle’s mirrors when you lock the vehicle. This is useful when you’re parked on a busy street or a narrow pathway. If your BMW doesn’t come with this feature but you’d like it to, the simplest method to activate it is to open your iDrive 7.0 menu and navigate to “preconditioning setting,” which will activate it for your next journey.
You may not realize that your key fob could also be used to open your sunroof. To do this, hold and press the unlock button on your key fob for a couple of minutes before releasing it. When your windows are completely down and rolled up the button will be reset. You can also do the same thing with your roof vents, that will stay open until you push the unlock button again.
While you’re at it and you’re there, if the battery in your key fob is dead, you can replace it yourself from the at home in the comfort of your own home. The tiny CR2032 is also known as a watch-battery is contained within the key fob cover. It can be replaced by gently removing the cover and replacing the original battery.
Our BMW Remote Start Retrofit offers an affordable option to upgrade your BMW to remote start capabilities. This kit is 100% lease-friendly, and is installed in less than four hours and requires no coding. It is compatible with FEM, CAS4 or BDC1 modules.