Replacement UPVC Door Handles

Whether you’re replacing your handles or need to add more security, you can choose the perfect handle for your door. These upvc handles are easy to install and conform to the required 92mm centres of multipoint locks.

The backplate fixing center and the lever/keyhole dimensions are the most important measurements. Check these measurements against your existing marks carefully before placing an order.

Lever/Pad

Lever pad handles consist of a lever on one side and a handle that is shaped like a paddle on the opposite. These are designed for use with key wind locks. However, they can be fitted to multipoint split spindle door locks.

Our range of upvc door handle repair handle lever pads are available in a wide variety of finishes and these will be shown in the drop-down list after you have selected the right handle for your doors. Certain types of handles are not available in all finishes. Always look over the technical drawings and size sections for the specific item that you want to ensure that you receive the correct size and fit.

When you are choosing the new set of upvc lever pad door handles it is essential to ensure that they are in line with the PZ (distance between the spindle of the handle and the center of the hole for the cylinder) of your existing multipoint door locks, as they need to be in line to ensure that the doors remain locked, whether from the inside or outside. The handles we sell are designed to work with most standard cylinder locks, but you should always double-check before ordering.

You’ll need to remove your existing handles and dismantle the lock case if upgrading to dual spindle handle levers because this will require a split cylinder inline. You can purchase these separately. We have included a technical diagram in the images of each product.

After you have removed the screws holding your existing door handle it is a good idea to loosen them, and then inspect the mechanism to determine the condition it is in. If the screws are too tight it is possible to loosen them even more. Then, you can remove the spindle from the handle and replace it with your new upvc handle. It is crucial to make sure that the handle is in the proper position before screwing it into place. You can do this by placing your finger between the frame, and the handle to ensure that it’s in the right position.

Lever/Lever

The lever handles on doors are used to operate a multi-point lock with a Euro cylinder. They can be found on a variety of double upvc doors as well as wooden and aluminum doors. They come in two varieties, with an interior lever and a paddle outside. Sprung – these come with a spring cassette within the backplate that helps bring the handle lever to a horizontal position. Non-sprung – These do not include a spring mechanism and must be manually pulled to raise the handle lever to a horizontal position.

To fix a sagging door handle lever you’ll need to locate the hole or pin that is the detent access point. This is usually small, protruding ring or rectangular found on the handle base plate. Once you’ve located it, you can loosen the set screw with the help of a screwdriver, and then take it off to allow the lever to return to its horizontal position.

Once the handle is placed horizontally, you can reinstall the screws. Close them to ensure that the handle stays attached to the base plate. You should also consider applying an adhesive that locks the threads of the screw to increase the grip and prevent them from loosing over time.

Drooping lever handles on door handle repairs handles could be the result of many factors. The most frequent cause is that the fixings aren’t tight, causing the lever bearing to bind against the door. It is also possible that the levers have not been operated at the correct angle, which stretches the latch mechanism and stops it from fully springing into operation.

Another common cause is that the sprung lever isn’t operating correctly and this is usually due to the spring not being in the proper position within the backplate. To check whether the handle is back to its horizontal position, simply turn it.

It is crucial to repair door handle any door handles that are loose as soon as you can. This could cause excessive wear on the screws, door handle repairs and the handle might be able to fall off the base plate. You should also tighten any loose screws on a regular basis to stop them from becoming looser.

Lever/Snib

These upvc handles are called ‘Snib handle sets’ and come with a snib lock button at the top of the door lever. If you don’t have a dummy lock device you can use this feature to lock the door. These handles come with a Fullex lock 68PZ. (68mm between spindle and the centre of the lock). We also stock a range of door handles with 68PZ from manufacturers such as Ferco and Fab & Fix.

You can make your home more modern by changing the handles on your doors, whether you are replacing existing handles or installing new ones on doors you constructed. There are various styles available for door handles made of upvc, including the traditional lever on backplate. Other options include curved or straight short latches as well as dummy knobs for multi-point locks. These are ideal for French doors.

Rose door handles are circular or oval-shaped versions of lever-on-backplate handles. These kinds of Door Handle Repairs handles are equipped with an a knob or lever on a backplate that sits behind the knob or lever and is often referred to as a rosette, although certain back plates can be removed for concealed fixing.

There are a wide range of chrome and coloured finishes available for these handles to match your door and other hardware, such as hinges, knobs and bolts. Some handles are equipped with a grub screw to attach the knob or lever to the spindle. Other handles come with bathroom spindles that can be used to control bathroom locks and incorporate a thumbturn turn and release mechanism, which is ideal for bathroom doors.

Mortise

If your uPVC front door handle repair near me handle is stuck in the open position, the reason is likely to be due to the tubular latch. This can be caused by various reasons however the most frequent is the lack of lubrication on the latch plate. It is possible to fix this issue by opening the door, spraying lubricant on the handle and locking. It could also be that the latch has come loose from the backplate. This can be a bit more of a problem and would require a professional to fix it.

A multipoint door handle is an ideal solution to the problem of a sticking door handle. These handles mount through the door’s faceplate and are operated with an actuated thumb turn knob or key that activates an electronic cam that locks the deadbolt. The handles come in a variety of sizes to suit different types of uPVC door, and come in various attractive finishes that complement existing hardware. These handles are available via the internet or at a local locksmith. They are simple to install and come with clear directions.

To choose a replacement handle set, you will be required to determine the PZ dimension of your cylinder. This is the measurement in millimetres that lies between the outer edge of the frame of the door handle repairs near me and the centre of the hole in the handle. You should also know if your door has a hook style lock or a mortise style lock. Once you know these measurements, the most efficient method to locate the correct handles is to search by brand option on the website. This will help narrow down your options, and then you can choose the right size.

A typical handle set comes with the handle unit and a pair of different length screws drilling guides, as well as installation instructions. The smart models, like the Igloohome Smart Mortise 2+, include the complete mortice lock, which has built-in keypad. These are more complicated devices and are best suited for professionals who install them or competent DIYers. Some handle sets include a variety of accessories, including weather strips, which can be used to enhance appearance of the door.